How SlabSleuth Estimates Slab Leak and Repipe Costs

Every range on this site is compiled from the named sources below, with the date each was checked.

Slab leak repair ranges

The following ranges are based on repair cost data from multiple sources as of the dates shown.

Line ItemRange (USD)SourceAs Of
Detection$150 - $400Angi, HomeAdvisor, Bob VilaApr 2026 - Jun 2026
Access: Jackhammer through slab$500 - $3,000Fixr, HomeGuideMay 2025 - 2026
Access: Tunnel under slab$900 - $2,000Fixr (limited data)May 2025
Repair: Spot repair$150 - $2,000Angi, HomeAdvisor, Fixr, HomeGuide2025 - 2026
Repair: Reroute$600 - $7,500Angi, HomeAdvisor, HomeGuide, Fixr2025 - 2026
Repair: Epoxy lining$500 - $3,500HomeGuide, Fixr, Angi2025 - 2026
Slab restore (after access)$300 - $6,750AngiApr 2026

Note: Tunneling cost data comes from a single source; we label it "limited data" on the calculator.

Whole-home repipe ranges

Repipe costs are driven primarily by the number of plumbing fixtures and the pipe material chosen.

Per-fixture cost

Average: $1,200 per fixture (range $350 - $1,800). Source: Angi, Mar 17 2026.

Whole-home cost

Range: $1,500 - $15,000 (average $7,500). Source: Angi, Mar 17 2026.

Pipe materials (installed per linear foot)

PEX: $0.40 - $2.00 per foot. Copper: $2.00 - $8.00 per foot. Source: Angi, Mar 17 2026.

Copper premium

On a home around 2,000 square feet, copper typically runs about $6,000 - $12,000 more than PEX. Source: HomeGuide 2022 (ratio corroborated by Angi 2026 per-foot rates).

Sources

Angi (Repipe)

angi.com/articles/cost-to-repipe-a-house.htm

Updated Mar 17 2026

HomeGuide (Repipe)

homeguide.com/costs/install-new-house-plumbing-pipes-cost

Oct 16 2022 (older, cross-checked against 2026 data)

Forbes Home (Repipe)

forbes.com/home-improvement/plumbing/install-replace-plumbing-cost/

Sep 19 2022 (older, cross-checked against 2026 data)